Performance Features- Ratings: 1/8 to 5 HP at 240 VAC 1-ph, 1/8 to 25 HP (ND) at 240 VAC 3-ph,
1/2 to 25 HP (ND) at 480 VAC 3-ph - Overload Capacity: 150% for 60 sec. (Heavy Duty) 120% for 60 sec. (Normal Duty)
- Control Methods: V/f Control, Open Loop Current Vector Control, PM Open Loop Current Vector Control Simple closed loop speed control
- DC injection braking, ramp to stop
- Electronic reversing
- Adjustable accel/decel:0.01 to 6000 seconds
- Controlled speed range: 40:1(1) 100:1(2)
- Speed Regulation: ± 0.5 to 1% with slip compensation(1) ± 0.2%(2)
- Displacement power factor: 0.98
- Output frequency: 0 to 400 Hz
- Frequency resolution: 0.01 Hz with digital reference 0.06 / 60 Hz with analog reference
- Frequency accuracy: 0.01% with digital command 0.5% with analog command
- Volts / hertz ratio: infinitely adjustable pattern
- DC Injection braking: adjustable amplitude, duration, current limited
- Torque boost: full range, auto
- Power loss ride-thru: 0.5 sec.
- Speed search
- Auto restart
- 3 Critical frequency rejection settings
- Slip Compensation
- Energy $avings Function
- Enhanced PID with loss of feedback function
Protective Features- Current limit, stall prevention during accel, decel, and run
- Motor and drive overload
- Over voltage prevention function
- Instantaneous over current
- Short circuit
- Under voltage
- Heatsink overheat
- Ground fault protection
- Over/under torque
- Short circuit current rating: 30KA rms sym.
Options- Dynamic Braking resistor (external)
- Multi-lingual, full-text remote LCD
- Profibus-DP, DeviceNet Communications
- Modbus TCP/IP, EtherNet/IP Communications
- DriveWizard Plus
- CASE software
- DIN Rail Mounting Kit
- USB Copy Unit (Y-stick)
| Design Features- Dual microprocessor logic
- Digital keypad operator, 5 digits
- LED status display
- Remote Mount Keypad Capability
- RJ-45 Style Digital Operator Connector
- 7 multifunction digital inputs
- 3 multifunction digital outputs
- Hardwire baseblock (EN954-1 Cat. 3)
- Programmable form C output contact for customer use: 1A at 250 VAC or 30 VDC
- 24 VDC control logic compatible with sourcing or sinking outputs (PNP or NPN)
- Carrier frequency: 15 kHz max; swing PWM
- 16 multi-speed settings plus jog speed
- 2 Remote speed references 0-10 VDC (20 kohms) or isolated 4-20 mA (250 ohms)
- Signal follower: bias and gain
- 2 programmable open collector outputs
- Analog monitor output: 0-10 VDC proportional to output frequency or output current
- Approx. 400 parameters & monitors
- Digital pulse train input (33 kHz max.)
- Cooling fan controlled by drive run/stop
- RS-422/485 MODBUS 115 kbps
- UL recognized electronic overload
- MTBF 28 years
- Built-in Dynamic Braking Transistor
- NEMA 1 enclosure
- Side-by-Side mounting
- Application Presets
- Maintenance monitors
Service Conditions- Ambient service temperature: -10° to 40°C (14° to 105°F) NEMA 1 -10° to 50°C (14° to 122°F) Open Chassis
- Ambient storage temperature: -20° to 60°C (-4° to 140°F)
- Humidity: to 95% non-condensing
- Altitude: to 3300 ft; higher by derating
- Service factor: 1.0
- Input voltage: -15% to +10% 200 to 240 VAC, 380 to 480 VAC
- Input frequency: +/-5%; 50/60 Hz
- Input Phase sequence insensitive
Standards- UL 508C (Power Conversion)
- CSA 22.2 No. 14-95 (Industrial Control Equipment)
- UL, cUL listed; CE marked
- RoHS compliant
- EN 50178 (LVD)
- EN 50081-2, EN 50082-2 (EMC)
- EN 954-1, Category 3 Safety Standard
- EN 61800-3
- IEC 529, 146
- FCC CFR 47 Part 15 Subpart B (w/ External Filter)
- TUV
|
Automation 
XBee Pro 50mW Series 2.5 Chip Antenna With BreakOut
This is the 2.4GHz XBee XBP24-BCIT-004...
Z-36s
PTZ ULTRA-Z
x36 optical zoom / x12 digital zoom
550 TVL, SONY FCBEX490EP
Preset speed of...
Yaskawa is the world's largest manufacturer of AC drives for industrial automation and OEM equipment. yaskawa drives...